EasyManua.ls Logo

Midea MJ-FP60D1 - Page 10

Midea MJ-FP60D1
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
09
• Switch off (0) and unplug before cleaning.
• Wipe the outside of the motor unit with a clean damp cloth.
• Handwash the removable parts.
• If you use a dishwasher, the harsh environment inside the dishwasher will affect the
surface finishes.
• The damage should be cosmetic only, and should not affect the operation of the
appliance.
Care and Maintenance
• You may remove the blade unit for cleaning.
• This is best done with the jug upside down.
• Grip the jug handle with one hand.
• Grip the bottom of the blade unit with the other hand.
• Turn the blade unit clockwise till it comes loose from the jug base.
• Carefully, pull it up and out of the bottom of the jug.
• Wash the seal and blade unit in warm soapy water, rinse, and air dry.
• Take great care with the blades – don’t handle them directly, use a nylon washing-up
brush.
• Replace the seal round the blade unit.
• Turn the blade unit upside down, and replace it in the bottom of the jug base.
• Turn the blade unit anti-clockwise to tighten it.
Blade Unit
• Unplug the appliance.
• Fit the spindle to the top of the motor unit.
• Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
• Choose the attachment you need.
• Recipe only for processor:Add 150g honey+ 10g tomato, after at max speed
setting,operation time: 5S.
Using the Processor
• Use the chopper for pulverizing ingredients.
• Use the mixer to mix ingredients together.
• Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar
together.
• Fit the attachment over the support, and slide it to the bottom.
• Lower the support into the centre of the jug, over the spindle.
• Put the ingredients into the jug - don’t fill it past the max mark.
• Hold the lid with the tube slightly behind the jug handle, set it on the jug, then turn it
clockwise, to lock the tab into the top of the handle.
• To add ingredients while the motor is running:
a)lift the pushed out of the tube.
b)add the ingredients via the tube.
c)replace the pusher.
• To remove the lid, turn it anti-clockwise to unlock it, then lift it off.
With the Support