10
• Fit the slicer or one of the graters into the disc.
• Lower the disc over the top of the spindle.
• Hold the lid with the tube slightly behind the jug handle, set it on the jug, then turn it
clockwise, to lock the tab into the top of the handle.
• Remove the pusher, and drop the ingredients down the tube.
• Replace the pusher, and use it to push the ingredients gently down the tube.
Don’t use fingers or cutlery to push food down the tubeonly the pusher.
• The blade(s) on top of the disc will slice or grate the food into the bowl.
• Don’t let the bowl gets more than about half full - stop and empty it.
• To remove the lid, turn it anti-clockwise to unlock it, then lift it off.
• Turn the disc over, and press one of the metal ends in and down, to remove the
slicer/grater.
With the Disc
• Unplug the appliance.
• Turn the mill upside down.
• Turn the mill base clockwise,to release it,and lift it out of the mill.
• Put the goods to be ground into the bowl-dry goods only.
★ For best results, don’t fill it more than one third full.
• Replace the mill base, inside the mill, and turn it anti-clockwise, to lock it in place.
• Turn the mill right way up.
• Lower the mill on to the motor unit, then turn the it clockwise, to lock it in place.
• Turn the speed control to P in short bursts till you achieve the size of grind you want.
• Let the speed control return to 0, and wait till the blades stop moving.
• Turn the mill anti-clockwise to unlock it, and lift it off the motor unit.
• Turn the mill upside down.
• Tap the mill a couple of times to move all the grounds into the bowl.
• Turn the mill base clockwise, to release it,and lift it out of the mill.
• Empty the bowl.
Using the mill
• Switch off(0) and unplug before cleaning.
• Wipe the outside of the motor unit with a clean damp cloth.
• Handwash the removable parts.
• If you use a dishwasher, the harsh environment inside the dishwasher will affect the
surface finishes. Don’t put any part of the appliance in a dishwasher.
• The damage should be cosmetic only, and should not affect the operation of the
appliance.
Care and Maintenance
To Next Page
Loading...