Midea Air Handling Unit
- 4 -
of the cabinet.
• Polyurethane Insulation:
Panel insulation is made up of Polyurethane foam which is formed by specially designed molds under high
pressure. Its density is 50 kg/m
3
and standard panel thickness is 25mm, 35mm and 50mm.
• Modular Design:
Each module is 100mm. Standardized modular panels fastened by nuts and bolts makes on site assembly of CKD
units simple and neat.
• Heat Exchanger:
Coil is made by mechanical expansion to connect the copper tube with aluminum fins. Anti-corrosion coated
aluminum and copper fins are optional. Stainless steel coils are also alternative. The heating and cooling coils are
selected with professional software which is written based on the science with the actual situation of coil.
• Low Noise:
The low noise fans are selected with professional software which are statically and dynamically tested to ensure
high efficiency, low noise and low vibration. Internal spring isolators and vibration dampers are standard to
minimize vibration as well as a soft connection between air outlet of fan and the panel to minimize noise,
furthermore, special integrate structure panels also reduces the noise.
• Filter:
Nylon filter can be taken out to wash or change.
To Next Page
