For best performance, you must install your washer on a solid, level floor.
Wooden floors may need to be reinforced to minimize vibration or
unbalanced load situations.
Carpeting and soft tile surfaces can contribute to excessive vibration,
which can cause your washer to move slightly during the spin cycle.
16
Choosing a location
Washer dimensions and installation measurements
WARNING
Do not install your washer in ares where water may freeze, because
your washer always retains some water in its water valve, pump and
hose areas. Frozen water can damage the valve, pump, hoses and
other components.
Never install on a platform or weakly supported structure.
•
•
27.0 in.
29.0 in.
68.6 cm
73.6 cm
45.7 in.
116.0 cm
45.7 in.
116.0 cm
58.7 in.
149.0 cm
40.8 in.
103.5 cm
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troublesho
o
ting
To Next Page
Loading...
Need help?
General