•
•
•
•
With the tub empty, add one cup of chlorine bleach to the bleach
dispenser.
Press the Power button.
Turn the cycle selector to Tub Clean. When you select Tub Clean, the
only options you can change is the delay option.
Press the Start Pause button.
•
•
•
Select the Quick Wash cycle and add bleach to the washer. Run your
washer through the cycle without a load.
Turn the water faucets off and disconnect the inlet hoses.
Unplug your washer from the electrical outlet and leave your washer
lid open to let air circulate inside the tub.
You can damage your washer if you do not remove water from hoses and
internal components before storage.
To prepare your washer for storage:
Caution
Never use the tub clean cycle when laundry is in your washer. This may
damage the laundry or your washer.
Caution
If your washer has been stored in below-freezing temperatures, allow
time for any leftover water in your washer to dry out before use.
Storing your washer
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troublesho
o
ting
38
To Next Page
Loading...
Need help?
General