What to do if my Midea Inverter shows outdoor unit over-current protection?
If the Midea Inverter's outdoor unit is experiencing over-current protection issues, it is recommended to inspect the unit for any electrical faults and rectify them.
What to do if Midea MOU-48HDN1 Inverter displays IPM module protection?
If your Midea Inverter is showing signs of IPM module protection activation, check the IPM module and reset or replace it if necessary.
What to do if my Midea MOU-48HDN1 Inverter shows a full-water malfunction?
To address a full-water malfunction in your Midea Inverter, empty the water tank and ensure that the drainage system is functioning correctly.
How to fix communication malfunction in Midea Inverter?
If you encounter a communication malfunction between the indoor and outdoor units of your Midea Inverter, check the communication lines to ensure they are securely connected.
What to do if Midea Inverter displays outdoor unit voltage protection?
If your Midea Inverter's outdoor unit is experiencing voltage protection issues, verify the voltage supply to the outdoor unit.
How to fix open or short circuit of T3 or T4 temperature sensor in Midea MOU-48HDN1 Inverter?
To resolve an open or short circuit in the T3 or T4 temperature sensor of your Midea Inverter, inspect the sensor and replace it as required.
How to fix open or short circuit of T1 temperature sensor in Midea Inverter?
To fix an open or short circuit of the T1 temperature sensor in your Midea Inverter, inspect the T1 temperature sensor and replace it if necessary.
How to fix open or short circuit of T2 temperature sensor in Midea Inverter?
To fix an open or short circuit of the T2 temperature sensor in your Midea Inverter, inspect the T2 temperature sensor and replace it if necessary.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 48000 BTU/h |
| Outdoor Unit Dimensions (HxWxD) | 340 mm |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -15°C to 24°C |
Lists Midea LCAC indoor/outdoor unit models and their compatible indoor units.
Shows visual representations of different indoor and outdoor unit types.
Explains the meaning of characters in model names for units.
Highlights key characteristics and advantages of the product series.
Details features, dimensions, and specifications for compact cassette units.
Covers features, dimensions, and specifications for standard four-way cassette units.
Provides information on duct type indoor units, including features and specs.
Details specifications and features for ceiling and floor mounted indoor units.
Covers features, dimensions, and operation of console type indoor units.
Provides physical dimensions for various outdoor unit models.
Specifies required clearance for outdoor unit installation and maintenance.
Illustrates refrigerant piping configurations for different outdoor units.
Shows electrical wiring schematics for outdoor unit components.
Lists electrical specifications like voltage, current, and fuse ratings.
Defines the operational temperature and humidity ranges for the units.
Presents noise level data for outdoor units under different operating modes.
Explains diagnostic codes and how to check unit status via PCB switches.
Provides guidance for diagnosing and resolving common outdoor unit malfunctions.
Outlines important safety and procedural steps before installing the unit.
Details procedures for system evacuation and leak detection.
Explains how to calculate and add refrigerant based on pipe length.
Covers drainpipe installation, gradient, and testing procedures.
Specifies materials and methods for pipe insulation.
Directs users to wiring diagrams for proper electrical connections.
Guides through the final checks and startup procedures after installation.
Explains the functions and operation of the wireless remote controller.
To Next Page