What to do if my Midea Inverter shows outdoor unit over-current protection?
If the Midea Inverter's outdoor unit is experiencing over-current protection issues, it is recommended to inspect the unit for any electrical faults and rectify them.
What to do if Midea MOUB-36HDN1-R Inverter displays IPM module protection?
If your Midea Inverter is showing signs of IPM module protection activation, check the IPM module and reset or replace it if necessary.
What to do if my Midea Inverter shows a full-water malfunction?
To address a full-water malfunction in your Midea Inverter, empty the water tank and ensure that the drainage system is functioning correctly.
How to fix communication malfunction in Midea MOUB-36HDN1-R Inverter?
If you encounter a communication malfunction between the indoor and outdoor units of your Midea Inverter, check the communication lines to ensure they are securely connected.
What to do if Midea MOUB-36HDN1-R displays outdoor unit voltage protection?
If your Midea Inverter's outdoor unit is experiencing voltage protection issues, verify the voltage supply to the outdoor unit.
How to fix open or short circuit of T3 or T4 temperature sensor in Midea MOUB-36HDN1-R?
To resolve an open or short circuit in the T3 or T4 temperature sensor of your Midea Inverter, inspect the sensor and replace it as required.
How to fix open or short circuit of T1 temperature sensor in Midea MOUB-36HDN1-R?
To fix an open or short circuit of the T1 temperature sensor in your Midea Inverter, inspect the T1 temperature sensor and replace it if necessary.
How to fix open or short circuit of T2 temperature sensor in Midea MOUB-36HDN1-R?
To fix an open or short circuit of the T2 temperature sensor in your Midea Inverter, inspect the T2 temperature sensor and replace it if necessary.
General| Type | Inverter |
|---|---|
| Power Supply | 220-240V, 50Hz, 1Ph |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Operating Temperature (Heating) | -15°C to 24°C |
| Cooling Capacity | 36000 BTU/h |
| Outdoor Unit Dimensions (WxHxD) | 900 x 700 x 330 mm |
Lists the different model names for indoor and outdoor units and their capacities.
Visual representation of various indoor and outdoor unit types and models.
Explains the meaning of characters and numbers in model codes for identification.
Details the key technological advancements and benefits of the MIDEA LCAC DC Inverter units.
Comprehensive guide to the compact four-way cassette indoor unit, including features, dimensions, and wiring.
Covers features, dimensions, service space, wiring diagrams, and specifications for the standard four-way cassette.
Details features, dimensions, service space, wiring, and performance data for duct-type indoor units.
Information on ceiling and floor type units, including features, dimensions, installation, and electrical specs.
Guide to console type indoor units, covering features, dimensions, installation, and operating parameters.
Provides detailed dimensional data for various outdoor unit models in millimeters.
Specifies the required clearance around outdoor units for proper installation and maintenance.
Illustrates the refrigerant piping connections for different outdoor unit models.
Shows electrical connection schematics for various outdoor unit models.
Lists electrical specifications like voltage, frequency, and fuse ratings for outdoor units.
Defines the permissible operating temperature ranges for cooling and heating modes.
Presents noise level measurements (dB(A)) for different outdoor unit models under various operating conditions.
Explains how to use the outdoor PCB check switch to display operational status and error codes.
Provides diagnostic steps and solutions for common indoor and outdoor unit malfunctions.
Important safety and preparatory steps before installing the air conditioning system.
Detailed procedures for evacuating and leak testing the refrigerant piping system.
Guidelines for calculating and adding refrigerant based on pipe length and diameter.
Instructions for installing drainpipes, including gradient, support, and connection methods.
Recommendations for selecting and applying insulation material to pipes for optimal performance.
Directs users to refer to wiring diagrams for proper electrical connections during installation.
Steps and checks required to ensure the system operates correctly after installation.
Explains the functionality and operation of the wireless remote controller for various unit types.
To Next Page