Page 20
Operating
Instructions
(With Remote)
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions and How to Use Advanced Functions sections
of this manual for a detailed description of how to use your air conditioner.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two AAA batteries.
Put the batteries in the remote control before use.
1. Slide the back cover from the remote control
downward, exposing the battery compartment.
2. Insert the batteries, paying attention to match up the
(+) and (-) ends of the batteries with the symbols
inside the battery compartment.
3. Slide the battery cover back into place.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste.
Refer to local laws for proper disposal of batteries.
TIPS FOR USING REMOTE CONTROL
• The remote control must be used within 8 meters /
26 feet of the unit.
• The unit will beep when remote signal is received.
• Curtains, other materials and direct sunlight can
interfere with the infrared signal receiver.
• Remove batteries if the remote will not be used more
than 2 months.
Handing the Remote Control
SPECIAL NOTE
Button designs on your unit may differ slightly from the example shown.
If the unit does not have a particular function, pressing that function’s button on the
remote control will have no effect.
When there are wide differences between Remote control Illustration and “USER’S
MANUAL” on function description, the description of “USER’S MANUAL” shall prevail.
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries of
different types.
• Do not leave batteries in the remote control if you
don’t plan on using the device for more than 2
months.
To Next Page
Loading...
