11
The SLEEP function is used to decrease
energy while you sleep(and don’t need
the same temperature settings to stay
comfortable). This function can only by
activated via remote control.
NOTE:
The SLEEP function is not available in
FAN or DRY mode.
For the details, please see “sleep operation ”
in “ USER’S MANUAL ”.
Press SLEEP button
SLEEP Function
I SENSE (some models)
Press I SENSE button
When the I SENSE function is activated, the
remote display is actual temperature at its
location. The remote control will send this
signal to the air conditioner every 3 minutes
interval until press the I SENSE button again.
or
LOCK function
5s
5s
+
5s
+
Press together LED button and I SENSE or
LED and °C/°F
button at the same time more
than 5 seconds to activate Lock function.
All buttons will not response except pressing
these two buttons for two seconds again to
disable locking.
5s
To Next Page
Loading...
Need help?
General
