MCAC-RTT5T-201707 Midea R410A Tropical ClimaCreator Series Rooftop Package 50Hz
154
11) MODE: In setting operation mode, press this key to set the operation.
In other display mode, press this key to enter the setting mode. By default, it is
single-machine setting, and the first in-service air conditioner is displayed.
12) FAN: In setting operation mode, press this key to set the fan of the indoor unit of the air
conditioner to run in the following picture: (For rooftop packages, it is not available.)
13) TIME ON/TIME OFF: In setting operation mode, press them to set the timing startup of air
conditioner. Press them again to exit the timing setting, and restore the normal temperature
regulation operation mode.
14) SWING: In the setting operation mode, press this key to enable or disable the swing function.
If all currently selected air conditioner have no swing function, no effect will result after
pressing the key. (For rooftop packages, it is not available.)
15) RESET: Anytime when the RESET key is pressed, the centralized controller will reset. The
result is the same as the result of restoring power-on after power failure.
16) ON/OFF: Any time when pressing the key, the centralized startup/shutdown operation is
performed for all current in-service air conditioners in the centralized controller network. If all
in-service air conditioners in the network are in the power-off status, press the key to
perform the startup operation. If it is in the mode setting page currently, and the parameters
such as startup mode, temperature and air speed are selected, the air conditioner will be
started according to the selected parameters. If no mode is selected currently, and the air
conditioner is powered off or it is in other display page currently, and the default startup
mode is: cooling, high speed fan air, set temperature 24°C , swing function enabled. The
default startup mode is locked according to the system mode or judged according to other
To Next Page
Loading...
Need help?
General
