Press the ‘Auxiliary’ button.
Press the ‘Adjust’ button to select the Main and slave unit setting.
Press the ‘Auxiliary’ button again for confirmation.
Press the ‘Adjust’ button, set the air conditioner to be the main or slave unit.
Press the ‘Auxiliary’ button again for confirmation.
High and Low Temp cascade (Available for Dual units)
Press the ‘Auxiliary’ button.
Press the ‘Adjust’ button to select the High/low temp.
Press the ‘Auxiliary’ button again for confirmation.
Press the ‘Adjust’ button to select the high/low temp to be the one which you need, every
press the button will add 1°C.
Press the ‘Auxiliary’ button again for confirmation.
To switch off the function, press the ‘Auxiliary’ button and the ‘Adjust’ button again to select
High/low temp and press the ‘Auxiliary’ button for confirmation.
Dual units switch (Available for Dual units)
Press the ‘Auxiliary’ button.
Press the ‘Adjust’ button to select the Dual units switch.
Press the ‘Auxiliary’ button again for confirmation, then the screen display ‘Stand-Rotation 12h’.
Press the ‘Adjust’ button to select the dual units switch hours to be the one you need, (Factory
To Next Page
Loading...
