3. Compact Type Base Station Air Conditioner
3.1 Features
Compact designed, the whole air conditioner system is protected by room, making it much stable and
longer working life.
The unit designed for large air flow volume, can take the heat load out from base station rapidly and
effectively.
Power phase sequence fault tolerance function. If the zero line is properly connected, the controller
will automatically adjust the wiring to make sure the power wiring is working properly.
Operating range from -40°C to 45°C outside temperature.
At low outside temperature, cooling directly with outside air, to save energy.
Fresh air inlet is equipped with dual filter to prevent equipment in station from dust damage.
Auto restart after power failure, unit will restart with the previous operation and setting automatically
when the power resumes.
An air-conditioning system can be configured maximum 2 units by the controller. If an individual unit
drops out or the heat load rises, inactive standby units are switched in for support.
The operating times of all connected units are compared to ensure that each on is used to an equal
extent.
Serial interface RS485 for connection to the internet to remote monitoring and control.
To Next Page
Loading...
