16
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
CONTROLS
a
b
c
d
g
f
e
a Setting button
b LED1 COOL indicator
c LED2 indicat
or
d LED3 indicator
e LED4 indicator
f LED5 COOLEST indicator
g LED6 Standby mode
DISPLAY
Once initially powered on, the display screen is on full display for 3
seconds.
The refrigerator default setting is medium, and the LED 3 indicator will be
illuminated.
This is normal operation display
In case of a failure, the appropriate LED light will flash in sequence.
In case of no failures, the current temperature setting of the refrigerator
will be on display.
Each time the temperature setting is pressed once, the temperature
setting changes one time.
After the temperature setting has been completed, the refrigerator will
run according to the set value after 25s.
From left to right, the temperature is lower.
The order of coldness settings is as follows:
LED1 LED2 LED3 LED4 LED5
TEMPERATURE SETTING
To Next Page
Loading...
Need help?
General
