6
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
OPERATION REQUIREMENTS
LOCATION REQUIREMENTS
WARNING
Explosion and Fire Hazard
•
Keep flammable materials and vapors, such as gasoline, away from
appliance.
•
Failure to do so, can result in death, explosion or fire.
This refrigerator is designed to be freestanding only, and should not be
recessed or built-in.
• Place your refrigerator on a floor that is level and strong enough to
support the refrigerator when it is fully loaded.
• Place your refrigerator where there is access to the required electrical
connection. See “Electrical Requirements.”
• Position the refrigerator in a location away from direct sunlight, because
it may affect the acrylic coating and heat sources may increase
electrical consumption. To ensure optimal performance, install in areas
with an ambient temperature between 41°F (5°C) and 109°F (42.8°C).
NOTES:
– Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption.
– Extremely cold temperatures may also prevent the refrigerator from
performing properly.
• Avoid locating the refrigerator in areas with high humidity.
• Adequate air circulation is required for efficient operation. Maintain the
recommended clearance to ensure adequate air circulation.
RECOMMENDED CLEARANCE
a
a
a
a
a 3" (7.6 cm)
Clearance at the
top, back and
both sides of
the refrigerator
NOTE: If you place the refrigerator next to a fixed wall, allow sufficient
space on the hinge-side for the door to swing open.
To Next Page
Loading...
Need help?
General
