Midea MSAG-10CRN8 - Page 13

11
Determine wall hole location
Correct orientation of Mounting Plate
Remove the screw that attaches the
mounting plate to the back of the
indoor unit.
Secure the mounting plate to the wall
with the screws provided. Make sure
that mounting plate is flat against the wall.
Drill wall hole for connective piping2
Screw
Step 1：
Step 4：
Step 2：
Step 3：
Confirm the mounting plate you own. Determine the
location of the wall hole based on the position of the
mounting plate.The dotted rectangular box above
shows the size of your product.
11
Type A Type B
Dierent models have dierent mounting plates.
For the dierent customization requirements, the
shape of the mounting plate may be slightly
dierent. But the installation dimensions are the
same for the same size of indoor unit.
See Type A and Type B for example.
230mm(9.1in)
165mm(6.5in)
527mm(20.7in)
247mm(9.7in)
106mm(4.2in)
48mm(1.9in)
29mm(1.1in)
37mm (2.1in)
139mm
(5.5in)
W
W
W
179mm(7.1in)
348.4mm(13.7in)
231mm(9.1in)
403mm(15.9in)
H
H
H
49mm(1.95in)
47mm(1.8in)
47mm(1.8in)
37mm (1.45in)
36mm (1.4in)
36mm (1.4in)
49mm (1.95in)
H
53mm (2.1in)
53mm (2.1in)
48mm (1.9in)
101mm(4.0in)
W
190mm(7.5in)
190mm(7.5in)
136mm(5.4in)
121mm(4.8in)
121mm(4.8in)
244mm(9.6in)
246mm(9.7in)
418mm(16.5in)
Indoor unit dimensions(WxH):
729mm(28.7in)x292mm(11.5in)
Indoor unit dimensions(WxH):
805mm(31.7in)x295mm(11.6in)
Indoor unit dimensions(WxH):
835mm(32.9in)x295mm(11.6in)
Indoor unit dimensions(WxH):
971mm(38.2in)x321mm(12.6in)
Φ65mm (2.5in)
Φ65mm (2.5in)
Φ65mm (2.5in)
Φ65mm (2.5in)