Need help?Do you have a question about the Midea Forest MSAFB-12CRN1-NB8 and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 17-32°C |
| Indoor Unit Dimensions (WxHxD) | 805 x 285 x 194 mm |
| Type | Split |
| Air Flow (High) | 600 m³/h |
| Noise Level (Outdoor) | 52 dB(A) |
Details specific indoor and outdoor unit model numbers and their capacities.
Lists technical specifications for compressors, indoor/outdoor fans, and coils.
Provides visual representations of indoor and outdoor unit dimensions.
Illustrates the internal electrical connections for indoor and outdoor units.
Shows the flow of refrigerant through the system during cooling operation.
Presents cooling capacity data based on indoor/outdoor conditions.
Provides factors to adjust cooling capacity based on elevation differences.
Displays sound pressure levels for indoor units across different frequencies.
Lists electrical parameters like voltage, current, and power supply for models.
Explains various operating modes like Cooling, Heating, Fan, Auto, and their functions.
Details the usage and functions of the infrared remote controller buttons.
Provides a step-by-step visual guide to the overall installation process.
Guides on choosing the optimal and safe location for unit installation.
Detailed steps for mounting and connecting the indoor unit.
Instructions for correctly installing the outdoor unit, including bolt pitch and drain joint.
Explains how to connect refrigerant pipes, including length and drop height limits.
Details the process of removing moisture and air from the system and checking for leaks.
Provides guidance on calculating and adding refrigerant based on pipe length.
Outlines safety checks for electrical connections and gas leak detection.
Describes procedures for verifying the unit's functionality after installation.
To Next Page