Midea F Series

37 pages

To Next Page

To Next Page

Loading...

MIDEA 60Hz

WINDOW MECHANICAL

SIDE AIR DISCHARGE

F SERIES

Questions and Answers:

C
collinwatkinsAug 6, 2025
What to do if Midea F Series Air Conditioner is cooling, but room is too warm?
- K
  Kevin DawsonAug 6, 2025
  If your Midea Air Conditioner is cooling, but the room is too warm and there's no ice forming on the cooling coil, consider these possibilities: * The air filter might be dirty, restricting airflow. Clean the air filter. * The thermostat could be set too warm. Turn the thermostat clockwise to a colder setting. * Air directional louvers may be positioned improperly. Adjust them for better air distribution. * The front of the unit might be blocked by drapes, blinds, or furniture, restricting air distribution. Clear any blockage. * Doors, windows, or registers might be open, allowing cold air to escape. Close them. * If the unit was recently turned on in a hot room, allow additional time for it to remove stored heat from walls, ceiling, floor, and furniture.
J
Jonathan MirandaAug 10, 2025
How to fix Midea Air Conditioner when air is not cold enough?
- J
  John PorterAug 10, 2025
  Here's what might be happening if the air from your Midea Air Conditioner doesn't feel cold enough: * You may need to turn the selector to a higher COOL position. * The thermostat could be set too warm. Set the thermostat to a colder temperature. * If the room temperature is below 18°C (64°F), cooling may not occur until the room temperature rises above this level. * The temperature sensing tube might be touching the cold coil behind the air filter. Straighten the tube away from the coil.
D
Dana ColemanAug 14, 2025
Why Midea F Series Air Conditioner turns on and off rapidly?
- K
  Kimberly CombsAug 14, 2025
  If your Midea Air Conditioner turns on and off rapidly, it could be due to: * A dirty air filter restricting airflow. Clean the air filter. * Extremely hot outside temperatures. Set the unit to high cool to bring air past the cooling coils more frequently.
R
rvazquezAug 19, 2025
What to do if Midea F Series Air Conditioner makes noise when cooling?
- J
  Jaime OdonnellAug 19, 2025
  Some noise is normal, but here’s what to check if you're concerned about noise from your Midea Air Conditioner during cooling: * Air movement sound is normal; if it's too loud, turn the selector to a lower FAN setting. * The sound of the fan hitting water in the moisture removal system is normal when humidity is high. Close doors, windows, and registers. * Window vibration due to poor installation. Refer to the installation instructions or check with the installer.
C
Christopher KingAug 23, 2025
What to do if Midea F Series Air Conditioner drips water inside?
- J
  joshuabrownAug 23, 2025
  If water is dripping inside from your Midea Air Conditioner when it's cooling, consider the following: * Improper installation. Tilt the air conditioner slightly to the outside to allow water drainage. Refer to the installation instructions or check with the installer. * The unit might be removing a large quantity of moisture from a humid room, which is normal during excessively humid days.
L
Lisa GallowayAug 27, 2025
Why Midea F Series Air Conditioner is cooling, but room is too warm and ice is forming?
- A
  Adrienne RobbinsAug 27, 2025
  If your Midea Air Conditioner is cooling, but the room is too warm and ice is forming on the cooling coil, here's what could be happening: * The outdoor temperature might be below 18°C (64°F). To defrost the coil, set the selector to the FAN position and then set the thermostat to a warmer position. * The air filter may be dirty. Clean the filter. To defrost, set the selector to FAN. * The thermostat could be set too cold for night-time cooling. To defrost the coil, set the selector to a FAN position and then set the thermostat to a warmer position.

Midea F Series Specifications

General

Brand	Midea
Model	F Series
Category	Air Conditioner
Language	English

Summary

1. Precaution

1.1 Safety Precaution

Instructions to prevent injury and property damage.

1.2 Warning

Critical warnings related to installation and product use.

2. Function and control panel.

2.1 Functions

Lists operational modes, fresh air, swing, auto defrost, and time delay safety features.

2.2 Control panel

Details the control panel layout and components for specific models.

3. Dimension.

4. Refrigerant Cycle Diagram.

5. Wiring Diagram.

6 Installation details.

6.1 Select the best location.

Guidelines for choosing an optimal and safe installation site.

6.2 Check off installation.

Essential checks after installation for proper function and safety.

6.3 How to drain.

Instructions for setting up the drainage system for condensate water.

6.4 How to install.

Covers housing installation, unit insertion, wall mounting, and general steps.

7 Operation characteristics.

7.1 Cooling operation

Graph showing cooling performance based on indoor and outdoor temperatures.

7.2 Heating operation

Graph illustrating heating performance based on indoor and outdoor temperatures.

7.3 Characteristic of temperature sensor.

Table detailing temperature sensor resistance values at different Celsius temperatures.

8 Troubleshooting

Related product manuals

Preview: Midea KJR-12B/DP-F-1

Midea KJR-12B/DP-F-1

Midea CE-CF0.3BD/N3-F

Midea CE-CFZ0.3BD/N3-F

Preview: Midea KJR-12B/DP-F Series

Midea KJR-12B/DP-F Series

Midea MKA-1200R

Midea MKA-1500R

Midea MDV-D56Q4/N1-D

Midea MDV-D36Q1/N1-D

Midea MDV-D90Q4/N1-D

Midea MDV-D28Q4/N1-E

Midea MDV-D80Q4/N1-D