Need help?Do you have a question about the Midea CE-CFZ0.3BD/N3-F and is the answer not in the manual?
General| Model | CE-CFZ0.3BD/N3-F |
|---|---|
| Power Source | AC |
| Operating Temperature | 5°C - 35°C |
| Operating Humidity | 80 % |
| Power Supply | AC 220-240V, 50Hz |
Essential safety guidelines for servicing the dehumidifier to prevent hazards.
Procedure to test electrical insulation integrity and prevent shock risks.
Key functionalities including auto-defrosting, auto shutdown, and wide temperature operation.
Identifies and explains the function of each control button and display element.
Physical dimensions for the CE-CF0.3BD/N3-F and CE-CFZ0.3BD/N3-F models.
Details the initial self-diagnosis sequence and operational state upon power-up.
Explains how the unit operates based on target humidity and compressor cycling.
Describes the operation of the continuous dehumidification mode and its indicators.
Details the shutdown process when the ON/OFF button is pressed.
Explains the 3-second delay for compressor startup after mode changes or restarts.
Covers protection mechanisms like water-full, anti-icing, and sensor failure alarms.
Troubleshooting steps for incorrect water level alarms or lack thereof.
Addresses alarms related to pipe temperature sensors and power indicator flashing.
Diagnostic steps for humidity display issues and sensor board problems.
Guides for diagnosing and resolving unit or motor startup failures.
Lists potential causes and remedies for unusual operational noises.
Common user complaints, their causes, and recommended solutions.
To Next Page
