To Next PageTo Next PageWhat to do if water collects around the bottom of Midea Cube MAD in bucketless mode?
If water is collecting around the bottom of your Midea Dehumidifier when operating in bucketless mode: * Ensure the unit is level and the surface is free of debris. * Check the drain hose connection to ensure it is properly seated in the outlet.
Why is there water on the floor near my Midea Cube MAD?
If you find water on the floor near your Midea Dehumidifier, check the following: * Ensure the hose connection is secure: The hose to connector or the hose connection may be loose. * Verify the drain plug: If you intend to use the bucket, ensure the back drain plug is installed.
Why does frost appear on the coils of my Midea Cube MAD Dehumidifier?
The appearance of frost on the coils of your Midea Dehumidifier is normal. The unit has an auto-defrost feature.
What to do if the pump operation light blinks on my Midea Cube MAD?
If the pump operation light is blinking at 1 Hz on your Midea Dehumidifier: * Clean the pump filter. * Check the pump hose for blockages or leaks. * Empty the water bucket.
Why is my Midea Cube MAD not drying the air properly?
Several factors can prevent your Midea Dehumidifier from effectively drying the air: * Insufficient time: Allow enough time for the dehumidifier to remove moisture. * Obstructions: Ensure curtains, blinds, or furniture aren't blocking the front or back of the unit. * Humidity setting: Lower the humidity control setting. * Openings: Verify all doors, windows, and other openings are securely closed. * Low temperature: Room temperature may be too low (below 5°C or 41°F). * Vapor source: Identify and eliminate any water vapor sources in the room.
How to troubleshoot Midea Dehumidifier that does not start?
There are several reasons why your Midea Dehumidifier might not be starting: * Check the power connection: Ensure the dehumidifier's plug is firmly connected to the wall outlet. * Inspect the fuse/breaker: Check your house's fuse or circuit breaker box. * Check settings: The dehumidifier may have reached its preset humidity level, or the bucket might be full. * Bucket position: Make sure the water bucket is correctly positioned.
Why is my Midea Dehumidifier making a loud noise?
A loud noise during operation of your Midea Dehumidifier can be caused by: * Dirty air filter: Clean the filter, referring to the Care and Cleaning section. * Incorrect positioning: Ensure the unit is upright and not tilted. * Uneven surface: Place the unit on a level floor surface.
General| Type | Dehumidifier |
|---|---|
| Energy Star Certified | Yes |
| Weight | 40.8 lbs |
| Continuous Drain Option | Yes |
| Auto-Restart | Yes |
| Control Type | Electronic |
| Power Source | Corded Electric |
| Voltage | 115V |
| Auto Defrost | Yes |
| Continuous Drainage | Yes |
| Washable Filter | Yes |
| Dehumidification Capacity | 50 pints per day |
| Smart Features | Wi-Fi enabled, app control |
| Coverage Area | Up to 4, 500 sq ft |
| Operating Temperature | 41°F to 95°F |
| Capacity | 50 pints per day |
Overview of the dehumidifier's front, rear, bucket, and main unit components.
Lists available accessories such as drain hoses and casters for the dehumidifier.
Instructions for placing the dehumidifier in the optimal location for performance and airflow.
Step-by-step guide on how to install the optional caster wheels onto the bucket.
Details on the functions of each button and indicator on the dehumidifier's control panel.
Instructions on how to operate the unit without the bucket using a drain hose for continuous drainage.
Explanation of error codes and protection mechanisms for troubleshooting.
Information on features like Auto Defrost, compressor delay, and auto-restart.
How to set up continuous drainage using a hose directly to a sink or drain.
Instructions for using the pump feature to drain water from the unit to a desired location.
Guide on cleaning the external surfaces and air intake/outlet of the dehumidifier.
Procedure for regularly cleaning the internal water collection bucket.
Steps to remove, wash, and re-install the air filters for optimal performance.
Steps for cleaning and properly storing the unit when not in use for extended periods.
Statement declaring the dehumidifier's compliance with essential requirements and provisions.
Technical specifications for the wireless module used by the smart dehumidifier.
Important precautions and considerations when using the mobile application with the dehumidifier.
Details the devices required to use the smart dehumidifier features.
Instructions on how to download and install the Midea Air mobile application.
Steps for creating a user account to use the smart dehumidifier features.
Information on accessing further app features and smart home capabilities.
