What to do if my Midea MDDM20 doesn't start?
If your Midea Dehumidifier isn't starting, ensure the plug is fully inserted into the outlet. Check your house's fuse or circuit breaker. Also, the dehumidifier might have reached its preset level, or the bucket could be full. Finally, verify that the water bucket is correctly positioned.
What to do if my Midea MDDM20 Dehumidifier is leaking water on the floor?
If you find water on the floor near your Midea Dehumidifier, check if the hose connection is loose. Also, if you're using the bucket to collect water, make sure the back drain plug is properly installed.
Why is frost appearing on the coils of my Midea MDDM20 Dehumidifier?
The appearance of frost on the coils of your Midea Dehumidifier is normal. It indicates that the auto-defrost feature is active.
Why Midea MDDM20 is not drying the air properly?
If your Midea Dehumidifier isn't drying the air effectively, consider these possibilities: * Not enough time has passed to remove the moisture. * Curtains, blinds, or furniture might be blocking the front or back of the unit. * The humidity control setting might be too high. * Doors, windows, and other openings may not be securely closed. * The room temperature could be too low (below 5°C or 41°F). * A kerosene heater or another source might be releasing water vapor into the room.
How to fix a loud Midea MDDM20?
If your Midea Dehumidifier is making a loud noise, it could be due to a few reasons. First, check if the air filter is clogged and clean it. Second, ensure the unit is upright and not tilted. Lastly, make sure the floor surface is level.
General| Model | MDDM20 |
|---|---|
| Dehumidification Capacity | 20 pints/day |
| Energy Star Rated | Yes |
| Noise Level | 51 dB |
| Continuous Drain Option | Yes |
| Auto-Restart | Yes |
| Operating Temperature | 41°F - 95°F |
| Moisture Removal Capacity | 20 pints per day |
To Next Page