How to fix a Midea Dehumidifier that makes a loud noise?
If your Midea Dehumidifier is operating loudly, it might be due to a clogged air filter. Clean or replace the filter. Ensure the unit is upright and not tilted. Also, check that the floor surface is level.
Why does frost appear on the coils of my Midea MDDP50 Dehumidifier?
Frost appearing on the coils of your Midea Dehumidifier is normal. This indicates that the auto-defrost feature is working.
What to do if there is water on the floor near my Midea MDDP50 Dehumidifier?
If you see water on the floor near your Midea Dehumidifier, check if the hose to connector or the hose connection is loose. Also, if you're using the bucket to collect water, make sure the back drain plug is properly installed.
Why is the pump operation light blinking on my Midea Dehumidifier?
If the pump operation light on your Midea Dehumidifier is blinking at 1Hz, try cleaning the pump's filter. Also, inspect the pump hose to ensure it's not kinked or blocked. Finally, empty the water from the bucket.
Why is my Midea Dehumidifier not drying the air properly?
If your Midea Dehumidifier isn't drying the air as expected, several factors could be at play. First, ensure you've allowed sufficient time for moisture removal. Check that curtains, blinds, or furniture aren't obstructing the front or back of the unit. The humidity control might need to be set lower. Verify that all doors, windows, and openings are securely closed. Room temperature should be above 5°C (41°F). Finally, ensure there isn't a kerosene heater or other source of water vapor in the room.
What to do if my Midea Dehumidifier does not start?
If your Midea Dehumidifier isn't starting, make sure the plug is fully inserted into the outlet. Check your house's fuse or circuit breaker box. Also, the dehumidifier might have reached its preset level, or the bucket could be full. Ensure the water bucket is correctly positioned.
Details the various components of the dehumidifier unit.
States that design specifications are subject to change without prior notice.
Provides guidelines on where to place the dehumidifier for optimal operation and safety.
Explains initial setup and operating conditions for the dehumidifier.
Lists included accessories and their placement within the unit.
Describes the buttons and indicators on the dehumidifier's control panel.
Details additional functions like Auto Defrost, error codes, and special buttons.
Explains methods for emptying the water bucket, continuous draining, and pump draining.
Provides guidance on cleaning the grille, case, bucket, and air filter.
Outlines steps for storing the unit when not in use for extended periods.
Guides users on finding, downloading, and installing the MSmartHome application.
Ensures the mobile device is connected to a wireless router and the internet.
Details the process of connecting the device to the wireless network.
Explains how to log in and control the dehumidifier via the MSmartHome app.
Covers advanced features like scheduling and circulation control via the app.
Provides information on applicable systems, wireless safety, and cautions for the app.
Contains FCC and IC compliance information for the device.
General| Type | Dehumidifier |
|---|---|
| Water Tank Capacity | 1.6 Gallons |
| Energy Star Certified | Yes |
| Weight | 41.7 lbs |
| Dimensions | 15.2 x 11.8 x 24.3 inches |
| Noise Level | 51 dB |
| Continuous Drain Option | Yes |
| Coverage Area | 4500 sq. ft. |
| Operating Temperature | 41°F - 95°F |
| Capacity | 50 pints |
| Filter Type | Washable |
To Next Page