6 HOW TO USE APP
Please ensure both your mobile device and dehumidifier are connected to the Internet
before using app to control the dehumidifier via internet, please follow the next steps:
From left to the right, these icons means Power, Fan, Continuous, Auto Dehumidification,
Dryer, Anti-mould and Pure.
1. Power
Click Power icon to turn on/off humidifier.
2. Fan mode
Click Fan icon to activate high ,med(on some models),low fan speed.
3. Continuous mode
Click Continuous icon to activate. Press again to deactivate.
4. Auto dehumidification mode(on some models)
Click Auto dehumidification icon to activate.Press again to deactivate.
5. Dryer/Max mode(on some models)
Click Dryer/Max icon to activate.Press again to deactivate.
6. Anti-mould mode(on some models)
Click Anti-mould icon to activate.Press again to deactivate.
8. Pure mode(on some models)
Click Pure icon to activate.Press again to deactivate.
7. FILL LEVEL Operation(on some models)
Bucket capacity can be selected in four levels-1, 2, 3 and 4.
NOTE: When select FILL LEVEL Operation, the APP can dispaly the water tank full time and the current
water. It may be slight different during the actual operation. The diaplay is used for reference only.
9. Humidity control.
The range of humidity is 35%RH-85%RH. User can add humitidy by clockwise adjusting
the white pointer. Similarily, user can minus humidity by anticlockwise adjusting the white
pointer. The yellow pointer means current indoor humidity.
Click “ Login ”
1
Choose the Dehumidifier.
2
Make sure the Bucket is not
full and place it in right
position.
3
8
To Next Page
Loading...
