Need help?Do you have a question about the Midea Forest MOAA31-12CN1-NB8 and is the answer not in the manual?
General| Model | MOAA31-12CN1-NB8 |
|---|---|
| Category | Air Conditioner |
| Brand | Midea |
| Cooling Capacity | 12000 BTU/h |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 52 dB(A) |
| Air Flow (Indoor) | 550 m³/h |
| Operating Temperature (Heating) | 0-30°C |
| Dimensions (Outdoor Unit) | 720 x 270 x 495 mm |
| Type | Split |
Identifies specific indoor and outdoor unit model numbers for purchased equipment.
Provides detailed technical specifications for the unit's components and performance.
Illustrates the physical dimensions of the indoor and outdoor units for installation planning.
Shows the internal electrical connections for the indoor and outdoor units.
Illustrates the flow of refrigerant through the system during operation.
Presents cooling capacity data under various indoor and outdoor conditions.
Provides factors to adjust cooling capacity based on elevation differences.
Displays sound pressure levels across different frequencies for indoor and outdoor units.
Details power supply requirements and electrical parameters for unit operation.
Explains the various operating modes like cooling, heating, fan, and auto, along with their functions.
Details the functions and button operations of the infrared wireless remote controller.
Lists all included parts, mounting hardware, and optional accessories for installation.
Presents a general step-by-step guide to the installation process.
Provides guidelines for choosing an appropriate and safe installation location for units.
Details the process of mounting the indoor unit, including plate attachment and piping holes.
Covers the installation of the outdoor unit, bolt pitch, and drain joint fitting.
Explains how to connect refrigerant pipes, including length limits and oil trap placement.
Outlines procedures for removing moisture and air, and testing for leaks in the system.
Guides on calculating and adding refrigerant based on pipe size and length.
Describes safety checks for electrical wiring and methods for detecting gas leaks.
Details the steps for performing a test run to verify proper unit functionality.
To Next Page