DM16-01.01.23en Kids Star Inverter
Service manual 37
11.2 Trouble shooting
11.2.1 EEPROM parameter error diagnosis and solution(E0/ EA/ E51)
Error Code
E0/ EA/ E51
Malfunction decision
conditions
Indoor or outdoor PCB main chip does not receive feedback
from EEPROM chip.
Supposed causes ● Installation mistake
● PCB faulty
Trouble shooting:
EEPROM: a read-only memory whose contents can be erased and reprogrammed using a pulsed
voltage. For the location of EEPROM chip, please refer to the below photos.
Note: The two photos above are only for reference, it’s may be not same totally with the ones
on your side.
Indoor PCB
Outdoor PCB
To Next Page
Loading...
