To Next PageTo Next Page
Need help?Do you have a question about the Midea MSE18HRN1 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Voltage | 220-240V |
| Frequency | 50Hz |
| Type | Split System |
| Cooling Capacity | 18000 BTU |
| Heating Capacity | 18000 BTU |
Guidance on choosing the optimal location for indoor and outdoor units.
Lists and details of parts included with the air conditioner for installation.
Step-by-step guide for securely mounting the indoor unit on the wall.
Instructions for routing drain hoses and connecting refrigerant pipes.
Bundling of tubing, cables, and drain hose, and insulation of auxiliary piping.
Precautions and guidance for installing the outdoor unit securely and effectively.
Instructions for securely anchoring the outdoor unit to its base.
Procedure for installing the drain joint and connecting the drain hose.
Detailed steps for performing correct flaring of refrigerant pipes to prevent leaks.
Essential safety rules and compliance requirements for electrical setup.
Guidance on correctly tightening flare nuts for secure pipe connections.
Procedure for connecting the power cable to the indoor unit's terminal block.
Procedure for connecting the power cable to the outdoor unit's terminal block.
Detailed steps for using a vacuum pump to remove air and moisture.
Step-by-step guide for operating the vacuum pump for evacuation.
Procedures for performing electrical safety and gas leak checks.
Steps to check all functions and operations after installation.
