Page 13
Wall
Indoor Outdoor
mm7-5
)
MOUNTING PLATE DIMENSIONS
Different models have different mounting plates.
In order to ensure that you have ample room to
mount the indoor unit, the diagrams to the right
show different types of mounting plates along
with the following dimensions:
•
Width of mounting plate
•
Height of mounting plate
•
Width of indoor unit relative to plate
•
Height of indoor unit relative to plate
•
Recommended position of wall hole (both
to the left and right of mounting plate)
•
Relative distances between screw holes
Indoor Unit
Installation
Fig. 3.2
Indoor unit outline
Correct orientation of Mounting Plate
47mm( )
33mm
30mm(
30mm(
47mm(
38mm( )
Left rear wall
Left rear wall
Right rear wall
Right rear wall
Φ
NOTE: When the gas side connective pipe is
506mm
hole 65mm
886mm
177mm
304mm
89mm
169mm
hole 65mm
317mm
344mm
hole 65mm
413mm
1161mm
hole 65mm
615mm
272mm
136mm 105mm
be 90mm
16mm or more, the wall hole should
To Next Page
Loading...
