Need help?Do you have a question about the Midea MSMBAU-09HRDN1-QRD0GW(B) and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | MSMBAU-09HRDN1-QRD0GW(B) |
| Category | Air Conditioner |
| Language | English |
Crucial warnings and cautions for installation and operation.
Notes on handling fluorinated gases, including R32.
Step-by-step guide for the installation sequence.
Guidance on preparing the wall hole for piping.
Essential checks before starting indoor unit installation.
Safety warnings specific to indoor unit installation.
Steps for securely attaching the mounting plate to the wall.
Procedures for drilling the wall hole for connection.
Detailed dimensions for various mounting plates.
Instructions for preparing and bending refrigerant piping.
Guidance on the correct angle for refrigerant piping.
Requirements for choosing the outdoor unit location.
Steps for securing the outdoor unit with anchor bolts.
Safety warnings specific to outdoor unit installation.
Detailed dimensions for MOB01 series outdoor units.
Detailed dimensions for MOB02 series outdoor units.
Detailed dimensions for MOCA series outdoor units.
Important notes when drilling the wall for outdoor unit.
Procedure for installing the drain joint at the bottom of the unit.
Instructions for connecting the drain hose and ensuring proper drainage.
How to plug unused drain holes to prevent leaks.
Guidelines for proper drain hose routing and placement.
Requirements for pipe length and elevation based on model.
Detailed steps for connecting refrigerant piping.
Proper techniques for cutting and removing burrs from pipes.
Steps for correctly flaring the ends of refrigerant pipes.
How to connect the indoor and outdoor unit pipes using flare nuts.
Specifications for tightening flare nuts using a torque wrench.
Critical safety warnings before performing wiring.
Steps for preparing outdoor unit wiring and cable selection.
Connecting wires to outdoor unit terminals and securing cables.
Steps for preparing indoor unit signal and power cables.
Connecting wires to indoor unit terminals and securing cables.
Power supply details for indoor units based on model.
Power supply details for outdoor units based on model.
Safety guidelines for performing pressure tests.
Information on using nitrogen for pressure testing.
Procedures for conducting pressure tests and leak detection.
Safety warnings before performing air evacuation.
Step-by-step guide for evacuating the system.
How to calculate and charge additional refrigerant based on pipe length.
Important notes and safety tips for refrigerant charging.
Essential checks before performing the unit's test run.
Procedure for conducting the test run for indoor and outdoor units.
Safety checks of the work area before servicing.
Precautions for handling refrigerants during servicing.
Checks related to refrigeration equipment and components.
Safety checks for electrical components during servicing.
Essential initial safety checks before servicing.
Guidelines for repairing intrinsically safe components.
Ensuring cabling is protected from environmental effects.
Methods for detecting flammable refrigerants safely.
Acceptable methods for detecting refrigerant leaks.
Procedures for removing and evacuating refrigerant.
Requirements for charging the system with refrigerant.
Steps for safely decommissioning the unit and recovering refrigerant.
Requirements for labelling de-commissioned equipment.
Procedures for safely recovering refrigerant.
Guidelines for transporting and storing units with refrigerants.
Steps for unpacking and checking equipment condition.
Overview of key installation tasks and procedures.
Tables detailing model dimensions, piping, and power specs.
To Next Page