Need help?Do you have a question about the Midea MSMBDU-24HRFN1-QRD0GW and is the answer not in the manual?
General| Cooling Capacity | 24000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Heating Capacity | 24000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Operating Temperature (Heating) | -7-24°C |
| Type | Split |
Essential safety guidelines to prevent injury and property damage during operation and service.
Critical warnings regarding installation, electrical safety, handling, and usage to avoid hazards.
Important cautions related to installation conditions, sharp edges, and operational considerations.
Guidelines for proper operation, including air flow, cleaning, and general usage advice.
Lists the model names for both indoor and outdoor units of the Midea Mission 3D Inverter Series.
Provides dimensions and diagrams for the indoor unit of the air conditioner.
Details the dimensions and diagrams for the outdoor unit of the air conditioner.
Specifies torque values for wrench tightening during installation of refrigerant pipes.
Provides specifications for selecting power cord cross-sectional area based on appliance current.
Details pipe size, standard length, maximum elevation, and refrigerant amount for different models.
Outlines the procedure for initial installation, including leak testing and evacuation.
Describes the process of adding refrigerant to a system that has been in use for an extended period.
Explains the steps for re-installing the system when the indoor unit requires repair.
Details the procedure for re-installing the system when the outdoor unit requires repair.
Defines abbreviations used for various temperature sensors and components in the system.
Explains the indoor display board icons, digital display, and Wi-Fi control display.
Lists and explains the main protection functions of the air conditioner.
Describes various operating modes like Fan, Cooling, Heating, Auto, Drying, and Forced operation.
Details error codes displayed on the indoor unit and their corresponding LED status.
Provides troubleshooting steps for various error codes and malfunctions.
Guides on how to measure resistance values of temperature sensors using a tester.
Explains how to measure winding resistance values of the compressor using a tester.
To Next Page