EasyManuals Logo

Midea MTA-60WN1 User Manual

Midea MTA-60WN1
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Midea Tropical R410A High Efficient Duct Technical Manual 50Hz MCAC-UTSM-201707
111
Push button TIME OFF again, and then adjust the time of timer off as desired.
When set the timer on and timer off simultaneously, if the setting times of timer on and
timer off are less than 10 hours, then timer off time will always 0.5 hours later than the
timer on. If the setting times of timer on and timer off is always later 1 hour than timer
on.
0.5 seconds later, after finishing the adjustment, the wired controller sends the
information of timer, the timer off and timer on setting are completed.
7) Cancel the Timer Setting
Push the TIME ON and TIME OFF, OK once more.
Adjust the time of timer on and timer off as 0.0 to cancel the timer on and timer off.
Notes: The time of timer on is the relative time; it is relative to the standard time of operating
wired controller. If having setting the timer on or timer off, then the clock cannot be adjusted.
8) Cancel the Filter Cleaning Icon
When the calculated operating time reach the setting filter cleaning time, the filter cleaning
icon will be lighted up, to remind the user to clean the filter screen. After cleaning it can long
press the ECONOMICIAL button for 3 seconds to cancel the icon.
9) Initialization Parameters Setting
For some functions of the wired controller, if the default setting in following list cannot meet
the user’s request, the user can select the function for setting follow the below method.
First
code(Y)
First code function
Second code (X)
0
1
2
3
4
0
Cooling only/Cooling and
heating selection setting
Cooling and
heating (Default)
Cooling only
\
\
\
2
Power-off memory setting
Yes (Default)
No
\
\
\
3
Time setting for reminding
to clean the filter
Cancel the
function
1250 hours
2500 hours
(Default)
5000
hours
10000
hours
6
Centigrade/Fahrenheit
selection setting
Centigrade
(Default)
Fahrenheit
\
\
\
Long press the FAN SPEED and MODE buttons for 5 seconds together, and enter into
the initialization function setting interface.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MTA-60WN1 and is the answer not in the manual?

Midea MTA-60WN1 Specifications

General IconGeneral
BrandMidea
ModelMTA-60WN1
CategoryAir Conditioner
LanguageEnglish

Related product manuals