Midea MV6-i670WV2GN1-E - Outdoor Unit Field Settings; PCB Switches and Switch Settings

V6-i VRF 50/60Hz
50
Midea V6-i Series Service Manual
1 Outdoor Unit Field Settings
1.1 PCB Switches and Switch Settings
Figure 4-1.1: Outdoor unit main PCB switches
Table 4-1.1: Outdoor unit main PCB switch settings
Switch
Setting
Switch positions
1
Description
S4
Static pressure
Standard static pressure (default)
Low static pressure mode (reserved)
Medium static pressure mode (reserved)
High static pressure mode (reserved)
Super high static pressure mode (reserved)
S5
Priority mode
2
Auto priority (default)
Cooling priority
VIP priority or voting priority
Heating only
Cooling only
Set priority mode via centralized controller (reserved)
S6-1
Reserved
Reserved
S6-2
Clear indoor
unit addresses
No action (default)
Clear indoor unit addresses
Table continued on next page …