1. Dust box cleaning
(1) Dust box removal: press the dust box key, pull out the dust box
backward and take out the cleaning brush upward (fig 1).
(2) Dust pouring: open the upper cover of the dust box and pour out
the dust sideways (fig 2).
(3) Clean the dust box and filter assembly (fig 3)- dust box can be
washable.
(4) Re-install: after drying in the sun, re-install and check whether it is
firm.
2. Cleaning of rolling brush and side brush
(1) Take out the rolling brush and its cover plate in turn according to the
direction of the arrow (the red end cover of the rolling brush is installed
toward the right side) (fig 4).
(2) Clean the rolling brush and its cover plate with cleaning tools or soft
cloth (the rolling brush and its cover plate can be washable and fully
dried before being put back for use) (fig 5-6).
(3) Pull out the side brush and remove the dust on the side brush (fig 7-8).
MAINTENANCE
04
EN-14
To Next Page
