19
CLEANING AND MAINTENANCE
1. Accumulated dust may be removed from the heater with a soft cloth.
Wipe the exterior surfaces of the heater occasionally with a cloth
moistened (not dripping wet) with a solution of mild detergent and water.
Dry the casing thoroughly with a soft dry cloth before operating the
heater.
2. The fan motor is lubricated by the factory, and will require no further
lubrication.
3. No other user maintenance is required or recommended. If service is
required, send your heater to the nearest authorized service depot.
4. Store the heater in a clean and dry place when not in use. REMEMBER
– portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources
of heat during the normal heating season.
Note: There may be traces of smoke or odour when the unit is first
operated. This is due to residue from the manufacturing process. It will
quickly evaporate, and should not re-occur.
5. This heater cannot achieve accurate temperature control of the
environment, and thus cannot be used for the storage of items, animals
and plants.
To Next Page
Loading...
