To Next PageTo Next PageWhat to do if my Midea NT20-22E Heater suddenly stops during heating?
If your Midea Heater stops suddenly during heating, it might be because the temperature has exceeded the thermal cut-off threshold. Allow the heater to cool down completely before attempting to use it again.
How to fix a Midea NT20-22E Heater that doesn't work after plugging it in?
If your Midea Heater isn't working after you've plugged it in, there could be a couple of reasons: * The plug may not be fully inserted into the electrical outlet. Ensure the plug is properly and securely inserted into the receptacle. * The temperature control knob might not be in the correct position. Check that the temperature control knob is turned to the ON position.
General| Type | Fan electric space heater |
|---|---|
| Fast heat | Yes |
| Heating element type | Ceramic |
| Number of power levels | 4 |
| Control type | Rotary |
| Suitable for | Indoor |
| Product color | White |
| Placement options | Floor, Table |
| Heating power | 2000 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 242 mm |
|---|---|
| Width | 113 mm |
| Height | 170 mm |
| Weight | 1100 g |
| Package depth | 284 mm |
| Package width | 131 mm |
| Package height | 177 mm |
| Package weight | 1200 g |
Explains symbols indicating danger, warning, caution, and attention in the manual.
Essential pre-operation checks for safe appliance use and power connection.
Instructions for correct placement of the heater on a stable, flat surface.
Guidance on using the temperature control knob to set the desired heat level.
Details on selecting between fan only, low, middle, and high heat settings.
Steps for safely powering down the heater, including unplugging.
Guidance on complying with WEEE and RoHS directives for product disposal.
Confirms product compliance with EU RoHS Directive on prohibited materials.
Details regarding the recyclable nature of the product's packaging materials.
