Midea NT20-22E User Manual

09
Safety Protection
1. Overheat protection: When the temperature in the heater is too high due to
abnormality in the use environment or improper use, the thermostat device can
automatically cut off the power and the heater stops working. After the whole heater
is cooling, the heater can return to the normal use after removing the abnormality.
2. Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after the
body is placed upright.
Safety Control
• Your heater is fitted with a safety device "Double Protector" that (1) switches off the
heater by thermal cut-off in the event of overheating or malfunction, It will reset while
the temperature reduce to a normal level. (2) Shuts off the heater by thermal fuse in
the event of overheating or malfunction and not operates by some other accidental
reason.
• If overheating or malfunctions continue, return the heater to an Approved Service
Agent for examination.
• The most common cause of overheating is deposits of dust or fluff entering the heater,
Ensure these deposits are removed regularly by unplugging the unit and vacuum
cleaning air vents and front grille.
• This heater cannot achieve accurate temperature control of the enviroment, and thus
cannot be used as insulation device for storage environment, items, animals and plants.
EN

Midea NT20-22E Specifications

General

Type	Fan electric space heater
Fast heat	Yes
Heating element type	Ceramic
Number of power levels	4
Control type	Rotary
Suitable for	Indoor
Product color	White
Placement options	Floor, Table
Heating power	2000 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	242 mm
Width	113 mm
Height	170 mm
Weight	1100 g
Package depth	284 mm
Package width	131 mm
Package height	177 mm
Package weight	1200 g