Midea NT20-22E User Manual

10
CLEANING AND MAINTENANCE
1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the
exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet)
with a solution of mild detergent and water. Dry the case thoroughly with a soft dry
cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further lubrication.
3. No other user maintenance is required orrecommended. If service is required, send
your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place whennot in use.
REMEMBER - portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of heat during
the normal heating season.
NOTE
There may be trace of smoke or odour when unit is first operated. Do not be on the
heating coil during the manufacturing process. It will quickly evaporate, and should not
re-occur.
EN

Midea NT20-22E Specifications

General

Type	Fan electric space heater
Fast heat	Yes
Heating element type	Ceramic
Number of power levels	4
Control type	Rotary
Suitable for	Indoor
Product color	White
Placement options	Floor, Table
Heating power	2000 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	242 mm
Width	113 mm
Height	170 mm
Weight	1100 g
Package depth	284 mm
Package width	131 mm
Package height	177 mm
Package weight	1200 g