Midea NT20-22E User Manual

08
OPERATION INSTRUCTIONS
Check Before Turning On The Machine
1. Check if the power wire is under good condition.
2. The product adopts 220-240V AC power supply, before use, please confirm if the
rated current of the power socket meets the local requirements with safe grounding
device, otherwise, please replace it with the qualified socket.
Put The Machine On The Flat Place
Uneven place may possibly cause the turnover switch at abnormal position, then the
heater can't work after turning on, therefore, please put the heater on the flat place, at
least the surface below the base of the heater must be flat.
Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob clock-
wise, when hearing the “poop” sound (it means the temperature controller is on), adjust
the Temperature Control knob to the desired temperature level.
Power Selection Knob
Turn the Power selection knob to select between 4 functions: Fan only, Low 900W
(LOW), MIDDLE 1300W(MIDDLE), High 2000W(HIGH).
Turn Off The Heater
A. Turn the Power selection knob to OFF position.
B. Turn the Temperature Control knob anticlockwise to the initial position.
C. Remove the power plug, store the heater after the entire machine has become cool.
EN

Midea NT20-22E Specifications

General

Type	Fan electric space heater
Fast heat	Yes
Heating element type	Ceramic
Number of power levels	4
Control type	Rotary
Suitable for	Indoor
Product color	White
Placement options	Floor, Table
Heating power	2000 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	242 mm
Width	113 mm
Height	170 mm
Weight	1100 g
Package depth	284 mm
Package width	131 mm
Package height	177 mm
Package weight	1200 g