4
Troubleshooting
If the product does not operate or does not operate properly, first check according to the following
list. If the reason the product does not operate or does not operate properly is not included in the
following list, the product mayhave failed. At this time, it is recommended to send the product to
the dealer for treatment
.
Problem Possible Cause Solu on
A er the power is
engaged, the power
indicator light does not
illuminate and the
machine does not work.
The plug may not be
plugged well.
Check whether the plug is
properly inserted into the
receptacle.
The temperature control
knob is not turned in
place.
Check whether the
temperature control knob
is turned to the ON
posi
on.
The machine suddenly
stops during hea
ng.
The temperature exceeds
the threshold of the
thermal cut-off.
Cool the machine before
use.
READ AND SAVE THESE INSTRUCTIONS
MAIN TECHNOLOGY SPECIFICATIONS
MODEL
LOW OSC HIGH OSCHIGH
POWER REGULATION RANGE (W)
10001000 15001500
Power supply: AC 220-240V ~ 50Hz
LOW
Safety Protection
1.Overheat protection: When the temperature in the heater is too high due to
abnormality in the use environment or improper use, the thermostat device can
automatically cut off the power and the heater stops working. After the whole
heater is cooling, the heater can return to the normal use after removing the
abnormality.
2.Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after
the body is placed upright.
NTY15-19CAE
To Next Page
Loading...
