6
CLEANING AND MAINTENANCE INSTRUCTIONS
1. The electric heater should be cleaned regularly to wipe out the dust
on the surface of flanges. As this may influence the radiating
efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust
with a soft damp cloth. Do not use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid
surfaces getting rusty, because of damage of the paint coat.
TECHNICAL SPECIFICATIONS
Model No. NY2311-13AL
Voltage 230-240V AC
Frequency 50Hz
Power Low 880-960W / Middle 1320-1440W / High 2200-2400W
To Previous Page
Loading...
