How to remove the
compressor.
9) Perform work of item 1,2,3.
10) Remove the electrical
control box and partition
plate.
11) Extract refrigerant gas.
12) Remove the sound
insulation material and
crankcase heating cable.
13) Remove terminal cover of
compressor, and
disconnect wires of
compressor thermo and
compressor from the
terminal.
14) Remove the discharge pipe
and suction pipe with a
burner.
15) Remove the hex nuts and
washers fixing the
compressor to bottom
plate.
16) Lift the compressor.
To Next Page
Loading...
Need help?
General
