Function Operation
Use of bent pipe
Pull upwards the upper sleeve of the bent pipe, and the bent
pipe automatically rotates and bends.
Battery charging
Note
1. The battery is not charged when leaving the factory, so please fully charge the bat-
4. When the battery life of the machine is obviously shortened and the charging time
is prolonged, please replace the battery with professionals. Do not disassemble and
assemble the machine by yourself to avoid danger.
S/N Operation Instructions
Plug one end of the power cord into the
socket and insert the other end into the
charging port at the tail of the handle on the
a period of full power, the indicator will go
out.
Charging time: 5-7 hours
Discharge time: About 10 minutes for High
Speed About 20 minutes for
Intermediate SpeedAbout 60
minutes for Low-Speed
To Next Page
Loading...
Need help?
General
