Keep a firm grip on the air conditioner, carefully
place the unit into the window opening so the bottom
of the air conditioner frame is against the window
sill (Fig.5). Carefully close the window behind the top
rail of the unit.
Extend the side panels out against the window
frame (Fig°6).
Place the frame lock between the frame exten-
sions and the window sill as shown(Fig.7).
Drive 3/4"(19mm) locking screws through the
frame _ock and into the sill (Fig.8).
NOTE: To prevent window sili from splitting,
drill t / 8"(3mm) pitot holes before driving
SCteWS o
_
To Next Page
Loading...
