EasyManuals Logo

Midea PTAC Series User Manual

Midea PTAC Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
UP/DOWN BUTTONS ( ▲ / ▼ )
- Push the UP (or DOWN) button to increase (or decrease) the set temperature of the unit in cooling
or heating mode.The temperature can be set by increments of 1
(1
).The setting temperature
appears in the display.
NOTE:Press and hold ▲ and ▼ buttons together for 3 seconds will alternate the temperature display between
&
scale.
FAN (FAN SPEED)
- Every time you push this button, the fan speed cycles through the settings as follows: HIGH-MED- LOW-HIGH.
DISPLAYS:
- Shows the set temperature in
or
. While on Fan only mode, it shows the room temperature.
Control code:
LC-Pads on the control panel is not available. The unit can be set by using wire controller only.
Note:
When receiving the wired remote control signal display LC. Or when wired remote control signal is not
received within the panel key operation for 5 seconds to display LC
FC-
Front desk control
www.mideaaircon.com
6
Turn the switch to off
You can connect the front desk
switch for two ways.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea PTAC Series and is the answer not in the manual?

Midea PTAC Series Specifications

General IconGeneral
BrandMidea
ModelPTAC Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals