To Next PageTo Next Page
Need help?Do you have a question about the Midea RG35A/BGEF and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | RG35A/BGEF |
| Category | Remote Control |
| Language | English |
Specifies the optimal distance and direction for remote operation.
Advises on avoiding obstructions, liquid damage, direct sunlight, and interference from other devices.
Details the process for replacing remote controller batteries and notes reprogramming needs.
Warns against mixing battery types, leaving them unused, and improper disposal.
Lists the different remote controller models and their compatibility.
Details voltage, signal range, and operating environment for the remote.
Outlines the key functionalities like operating modes, timer settings, and LCD display.
Starts or stops the air conditioner operation.
Selects the operating mode: AUTO, COOL, DRY, HEAT, or FAN.
Adjusts temperature settings or timer hours.
Restores previous settings or saves current ones.
Controls the automatic swing of the horizontal louver.
Sets the fan speed to AUTO, LOW, MED, or HIGH.
Adjusts the louver angle for specific airflow direction.
Initiates the auto-on timer sequence in 30-minute increments.
Activates SLEEP mode for comfort or FRESH mode for air purification.
Enables rapid cooling/heating or cleans the unit's evaporator.
Cancels all current settings and returns to initial defaults.
Initiates the auto-off timer sequence in 30-minute increments.
Controls display brightness or activates Follow Me temperature sensing.
Locks all settings to prevent accidental changes.
Shows when the remote is sending signals to the indoor unit.
Indicates the current operating mode of the air conditioner.
Shows the set temperature or timer settings.
Displays the selected fan speed or AUTO setting.
Appears when the ON/OFF button is pressed.
Appears when the LOCK mode is activated.
Appears when the FOLLOW ME function is active.
Appears when the SLEEP mode is active.
Guides on setting up the automatic operating mode.
Explains how to use COOL, HEAT, and FAN modes.
Details the steps for using the DRY mode.
Describes how to control louver movement for airflow.
Explains how to schedule the unit to turn on automatically.
Explains how to schedule the unit to turn off automatically.
Provides examples for setting ON, OFF, and combined timers.
Covers setting both ON and OFF timers simultaneously.
Details activating SLEEP for comfort or FRESH for air purification.
Controls display brightness or activates Follow Me temperature sensing.
Enables rapid cooling/heating or cleans the unit's evaporator.
