Midea RG10A(B2S)/BGEF

CR247-RG10
16117000002081
20191008
AIR CONDITIONER
REMOTE CONTROLLER MANUAL
Thank you very much for purchasing our air conditioner.
Please read this owner's manual carefully before using
your air conditioner. Make sure to save this manual for
future reference.
The design and specifications are subject to change without prior
notice for product improvement. Consult with the sales agency or
manufacturer for details.

Midea RG10A(B2S)/BGEF Specifications

General

Brand	Midea
Model	RG10A(B2S)/BGEF
Category	Remote Control
Language	English

Summary

Air Conditioner Remote Controller Manual

Remote Controller Specifications

Function Buttons

Handling the Remote Controller

Inserting and Replacing Batteries

Guide on how to insert or replace batteries in the remote control.

Installing Remote Control Holder

Instructions for mounting the remote control holder on a wall.

Tips for Using Remote Control

Recommendations for optimal remote control usage and signal reception.

Battery Notes and Disposal

Important notes on battery use and proper disposal methods.

Remote LCD Screen Indicators

How to Use Basic Functions

Setting Temperature

Configure temperature settings for the unit, adjustable in 1°C/1°F increments.

Auto Operation

Unit automatically selects mode based on set temperature. FAN speed cannot be set.

Cool Operation

Operate the unit in cooling mode, selecting temperature and fan speed.

Dry Operation

Use the unit for dehumidification. Fan speed is not adjustable.

Fan Operation

Operate the unit with fan only. Temperature cannot be set.

Heat Operation

Operate the unit in heating mode, selecting temperature and fan speed.

Setting the Timer Function

Timer On Function

Set the timer for the unit to automatically turn on after a specified period.

Timer Off Function

Set the timer for the unit to automatically turn off after a specified period.

How to Use Advanced Functions

Fresh Function

Activates Ionizer/Plasma Dust Collector to remove air impurities.

Sleep Function

Decreases energy use during sleep by adjusting temperature automatically.

AP Mode

Used for wireless network configuration.

Follow Me Function

Remote measures local temperature to optimize comfort.

ECOGear Function

Enables energy-efficient modes for cooling, adjusting temperature and fan speed.

Active Clean Function

Cleans the air conditioner evaporator to prevent frosting.

FP Function

Activates 8°C heating mode when unit is in heating mode.

Silence Function

Reduces compressor noise by lowering cooling/heating capacity.

Boost Function

Works unit harder to reach desired temperature quickly in COOL or HEAT mode.

Swing Function

Controls horizontal and vertical louver movement for airflow direction.