To Next PageTo Next Page
Need help?Do you have a question about the Midea CR090-RG52A and is the answer not in the manual?
General| Model | CR090-RG52A |
|---|---|
| Brand | Midea |
| Battery Type | AAA |
| Battery Quantity | 2 |
| Display Type | LCD |
| Type | Remote Control |
| Compatible Devices | Air Conditioner |
| Remote Control Type | Infrared |
Specifies the optimal distance and placement for the remote controller to ensure signal reception by the unit.
Advises on preventing signal blockage, liquid damage, direct sunlight exposure, and interference from other appliances.
Provides step-by-step instructions for safely removing old batteries and inserting new ones, noting reprogramming needs.
Warns against mixing battery types, leaving batteries in for extended periods, and improper disposal of used batteries.
Details the operating modes, timer functions, indoor setting temperature range, and LCD display capabilities.
Starts and stops the air conditioner operation with a single press.
Cycles through operation modes: AUTO, COOL, DRY, HEAT, and FAN. Includes a note for cooling-only models.
Allows selection of fan speed in four steps: AUTO, LOW, MED, and HIGH.
Activates/disables sleep function for comfortable temperature and energy saving in specific modes.
Activates or deactivates the FRESH function with a push.
Enables rapid cooling or heating by activating high fan speed or PTC heating.
Activates or deactivates the Self Clean function.
Disables or activates the indoor unit's display screen.
Increases the indoor temperature setting in 1°C increments up to 30°C.
Decreases the indoor temperature setting in 1°C increments down to 17°C.
Activates/disables SILENCE mode or FP function (heating mode specific).
Initiates auto-on timer sequence, setting increments by 30 mins or 60 mins.
Initiates auto-off timer sequence, setting increments by 30 mins or 60 mins.
Controls vertical louver movement for airflow direction, with auto-swing feature.
Controls horizontal louver movement for airflow direction, with auto-swing feature.
Enables remote temperature sensing to adjust operation based on user's location.
Shows the current operation mode: AUTO, COOL, DRY, HEAT, FAN, or back to AUTO.
Indicates when the remote controller is transmitting signals to the indoor unit.
Shows the ON/OFF status of the air conditioner, controlled by the ON/OFF button.
Indicates when the TIMER ON function is set and displays the set time.
Indicates when the TIMER OFF function is set and displays the set time.
Shows when the SILENCE function is activated, indicating low noise operation.
Indicates when the SLEEP operation mode is active.
Shows when the FOLLOW ME function is activated on models that support it.
Displays the set temperature or timer settings, depending on the active function.
Shows the selected fan speed (LOW, MED, HIGH) or AUTO mode indicator.
Explains how to set the unit to AUTO mode, including temperature setting and starting.
Details how to select COOL, HEAT, or FAN modes, set temperature, and fan speed.
Instructions for operating the unit in DRY mode, including temperature setting and limitations.
Explains how to use the SWING buttons to control vertical and horizontal louvers for airflow.
Guide to setting the timer for the unit to automatically turn on at a specific time.
Guide to setting the timer for the unit to automatically turn off at a specific time.
Illustrates the process of setting the air conditioner to automatically start after a specified duration.
Illustrates the process of setting the air conditioner to automatically stop after a specified duration.
Demonstrates setting both auto-on and auto-off timers for sequential operation.
Shows setting the unit to start before waking and stop after leaving the house.
