Need help?Do you have a question about the Midea KJR-120X/TFBG-E and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | KJR-120X/TFBG-E |
| Category | Remote Control |
| Language | English |
Detailed dimensions and structural overview of the wired remote controller.
Instructions for safely separating the upper casing of the wired controller.
Guide on attaching the controller's back plate to walls or switch boxes using screws.
Steps for inserting and setting the battery for the wired controller's internal clock.
Instructions for connecting the wired controller to the indoor unit via specific terminals.
Guidance on reassembling the wired controller after wiring connections.
How to switch between 12-hour and 24-hour clock display formats.
Procedure for turning the air conditioner on and off using the power button.
How to activate or cancel the 8°C heating function in specific modes.
Instructions for selecting modes like Auto, Cool, Dry, Heat, and Fan.
How to adjust the desired room temperature using up/down buttons.
Procedure for selecting fan speeds like Auto, Low, Medium, and High.
Instructions to enable or disable the audible feedback tones for button presses.
How to activate or deactivate the keypad lock to prevent unintended operation.
How to control the airflow direction and louver movement (up/down, left/right).
Procedure for activating the sleep mode to optimize comfort and energy saving.
How to activate or deactivate the turbo mode for rapid cooling or heating.
How to set the controller to sense temperature at its location.
Configuration for multi-unit rotation and backup operation.
Function to set operating schedules for each day of the week.
Setting the air conditioner to start operation at a specified time.
Setting the air conditioner to stop operation at a specified time.
Setting both start and stop times for air conditioner operation.
Step-by-step guide for configuring the on/off timer functions.
Initial setup for the weekly timer programming.
Selecting specific days for timer programming within the weekly schedule.
Configuring the start time for the first timer event.
Configuring the stop time for the first timer event.
How to activate and deactivate the weekly timer function.
Methods to temporarily or permanently stop operation within a scheduled timer.
Procedure to designate specific days as holidays, disabling scheduled operations.
Setting a delay for the air conditioner to turn off.
Duplicating timer settings from one day to another within the weekly schedule.
Initial setup for the weekly timer programming.
Selecting specific days for timer programming within the weekly schedule.
Configuring the start time for the first timer event.
Setting the specific time for a scheduled event in the weekly timer.
Selecting the operational mode (e.g., Cool, Heat) for a scheduled event.
Setting the desired temperature for a scheduled event.
Selecting the fan speed for a scheduled event.
Activating or canceling the weekly timer schedule.
Designating specific days as off-days within the weekly timer.
Duplicating timer settings from one day to another within the weekly schedule.
Removing a specific scheduled time event from a daily program.
Procedures for responding to and resolving error codes displayed on the controller.
Compliance with technical standards like EMC and EMI.
Querying and adjusting the static pressure value of the unit.
Initiating and managing the airflow test mode.
Adjusting temperature sensing based on controller location.
Selecting the operational type or configuration for the unit.
Defining the acceptable temperature range limits.
Enabling or disabling remote control signal reception.
Assigning addresses for dual-line controller configurations.
Resetting all settings to their original default values.
To Next Page