Midea KJR-120X/TFBG-E

Two - line controller address selection
Restore factory Settings
15.Queries and settings
When the air conditioning unit is o, into the query
function of temperature, press“ ”or “ ”to select
Adr, the temperature zone will display -- or A, B.
Where -- refers to the code setting of the wire
controller.
Press “Conrm” into setting state, press“ ”
or “ ”to select , then press “Conrm” to complete it.
-- : The code setting of the wire controller shall
prevail.
: The wire controller address setting.
: Restore factory Settings .
When the air conditioning unit is o, into the query
function of temperature, press“ ”or “ ”to select
INIt, the temperature zone displayed --.
Press “Conrm” into setting state, press“ ”or “ ”to
select to "ON" , then press “Conrm” to complete it.
46