When there are two units, press the button to select the rotating
function, and press “Conrm”to turn on or o the rotating function.
Rotation & Back-up indication
1. Press “Conrm” to set the rotating time,then press the button
“ ”or “ ” to set time. Setting time Range :1~99h,the default
time is 10 hours.
2. Step 2 set high temperature co-open temperature -- or 26~32
degrees -- that is, this function is invalid. When the ambient
temperature is 26~32 degrees, when the ambient temperature
is greater than or equal to the set temperature, the two machines
will run 24 degrees at the same time in the COOL mode.
3. Step 3 set the low-temperature co-open temperature -- or 5-15
degrees -- that is, this function is invalid. When the ambient
temperature is 5-15 degrees, when the ambient temperature is
lower than the set temperature, the two machines will run at the
same time for 24 degrees to make the heating mode.
9. Operation
24
To Next Page
Loading...
