3. Remove the door;
4. Dismantle the door stopper, and install it on other side;
5. Dismantle the lower hinge and leveling foot;
6. Install the lower hinge and leveling foot on lower left side of cabinet;
Hinge
Leveling foot
Hinge
Leveling foot
7. Put the door on lower hinge vertically, and validate the gas tightness of door
gasket, take out the spare upper left hinge and hinge cover from accessory
bag, then install the upper left hinge by fitting screws. finally to install the
hinge cover , and cover the hinge hole cap on upper right side.
13
To Next Page
Loading...
Need help?
General