Use ‘’◄‘’, ‘’►‘’, ‘’▼‘’, ‘’▲‘’ to scroll and use ‘’▼‘’, ''▲'' to adjust the parameters when setting ''OPERATE DAY'' and ''START''.
If the OPERATE DAY is set to FRIDAY and the START is set 23:00, the disinfect function will activate at 23:00 on Friday. If the
disinfect function is running, the following page will appear
Note:
When the hydraulic module operates in disinfection mode, if you press the On/Off key, the pressing is invalid and the
following interface is displayed.
In disinfection mode, the hydraulic module will operate according to the following figure. The water temperature of the
water tank will keep the disinfection temperature TtankS_DI.
Ttank
To Next Page
Loading...
